To choose a duvet cover, start with size: match the cover to your duvet insert's dimensions, not just to the name of your bed. Then pick a fabric and weave for how warm you sleep, and a closure you will find easy to use every time you change it.
Below you will find a size chart with real dimensions, how to get the insert-to-cover fit right, what each fabric and weave feels like, and the pros and cons of every closure type.
Duvet cover size guide
Bed names are a starting point, but dimensions are what matter. A duvet cover should be wide enough to cover the top of your mattress and fall over each side. The chart below shows standard US mattress sizes, the Delara duvet cover size we suggest for each, and roughly how much fabric that leaves to hang over each side.

Mattress dimensions vary slightly between makers, so treat these as close guides. Remember that the overhang also has to cover the depth of your mattress. On a deep mattress or one with a thick topper, less fabric will hang below the mattress edge.
How to measure
- Measure your duvet insert flat, edge to edge, in width and length. This is the number your cover should match.
- Measure your mattress width and depth, including any topper, to see how much drop you will get.
- If you are between sizes, or you want the duvet to reach further down the sides, size up and choose an insert to match.
Matching your duvet insert to your cover

The most common reason a duvet looks flat or bunched is a mismatch between the insert and the cover.
- Same size is ideal. When the insert and cover have the same dimensions, the corners fill out and the duvet lies neatly.
- Slightly larger insert for a fuller look. An insert an inch or two bigger than the cover gives a plumper finish. Much larger than that and it will bunch.
- Avoid a smaller insert. If the insert is noticeably smaller, it slides around and leaves empty corners.
Our duvet covers and our duvet inserts are made in the same dimensions in every size, so a Delara cover and insert of the same size are designed to fit each other. If you are shopping for both, our organic duvet inserts come in Twin, Queen and King to match.
Keeping the insert in place
Interior ties are what stop an insert from twisting inside the cover. Our duvet covers have eight interior corner and edge ties, which tie to the corner loops on our inserts. Turn the cover inside out, tie each corner to the insert, then flip the cover right side out over the insert. It takes a minute and saves a lot of nightly readjusting.
Fill affects the look
The same cover can look quite different depending on what is inside. A wool insert is denser and lies flatter, for a calm, tailored look. A light cotton insert gives a softer, airier shape.
Fabric and weave
Fabric decides how a cover feels, how warm it sleeps and how it looks after a few months. The weave matters just as much as the fiber.

Organic cotton percale
Percale is a plain weave, with one yarn over and one under. The result is crisp, matte and cool to the touch, like a well-pressed shirt. It is the classic choice for hot sleepers and warm climates. Our Organic Cotton Percale Duvet Cover Set is made from GOTS certified, long-staple organic cotton.
Organic cotton sateen
Sateen floats more yarn on the surface of the fabric, which gives it a smooth hand, a gentle sheen and a fluid drape. It feels a little warmer and cozier than percale. Our Organic Cotton 400TC Sateen Duvet Cover Set is woven from GOTS certified, long-staple organic cotton.
Linen
Linen has an open weave that lets air move freely, so it feels cool in summer. It has a relaxed, lived-in texture and softens with every wash. If you like a slightly rumpled, natural look, linen is hard to beat.
TENCEL lyocell and bamboo viscose
Both are smooth, silky fabrics with a cool feel against the skin. They suit people who love the slip of sateen but want something that feels cooler. We offer duvet cover sets in TENCEL Eucalyptus lyocell and in bamboo viscose with a sateen weave.
Does thread count matter?
Less than most people think. Fiber quality and weave matter more. A moderate thread count woven from long-staple cotton usually feels better and lasts longer than a very high number made from shorter fibers. Long-staple fibers resist pilling and stay strong through washing.
Which fabric suits you
- You sleep hot: percale or linen.
- You sleep cool or love a smooth feel: sateen.
- You want a silky, cool feel: TENCEL lyocell or bamboo viscose.
- You want certified organic: our percale and sateen organic cotton sets.
Duvet cover closures
The closure is what you deal with every time you change your bedding, so it deserves more thought than it usually gets.

Buttons
Buttons are classic and easy to repair. They take a little longer to fasten and can leave small gaps between them, but there is no hardware to snag.
Zippers
Zippers are the fastest to close and give the cleanest line. A hidden zipper tucked under a fabric flap looks neat. The trade-off is that a broken zipper is harder to fix, and zippers can catch on other laundry if left open.
Ties
Fabric ties are soft and simple, with nothing hard against your skin. They take a moment longer to tie, but they never break in the wash.
Envelope closures
An envelope closure uses an overlapping fabric flap with no hardware at all. It is common on pillow shams, including ours.
What comes in a duvet cover set

Our duvet cover sets include one duvet cover plus matching shams: one sham with a Twin, and two with a Queen or King. Queen and Twin shams measure 21 x 26 inches, and King shams measure 21 x 36 inches. You can see every fabric side by side in our duvet covers and sets collection.
Caring for your duvet cover

- Fasten the closure and turn the cover inside out before washing to protect the fabric and ties.
- Machine wash cold with like colors, and skip the bleach.
- Tumble dry low or line dry, and remove promptly to reduce wrinkles.
Frequently asked questions
What size duvet cover do I need for a full bed?
Most people choose a queen duvet cover for a full bed. On a full mattress, our 88 x 92 inch queen cover leaves about 17 inches of fabric on each side, which covers the mattress depth and gives a generous drape.
Should a duvet cover be bigger than the insert?
No. The cover and insert should be the same size, or the insert can be an inch or two larger for a fuller look. A cover that is bigger than the insert leaves empty corners and lets the insert shift.
Which duvet cover fabric is the coolest?
Percale and linen are the coolest choices because of their breathable weaves. TENCEL lyocell also feels cool to the touch. Sateen is a little warmer, which many people enjoy in winter.
Do I need a duvet cover with corner ties?
It helps a great deal. Interior ties stop the insert from twisting and bunching inside the cover. Our covers have eight interior corner and edge ties so the insert stays where you put it.
Leave a comment